Caution : You must read this before you proceed Chair Label Picture Description QTY A Seat 1 B Left Side Panel 1 C Right Side Panel 1 D Backrest 1 E Seat Cushion 1 F Back Cushion 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*20MM) 5 ② Bolt (M6*25MM) 7 ③ Allen Key 1 Before Beginning Assembly: Overview Backrest(D） Back Cushion（F） Seat Cushion（E） Right Side Panel（C） Left Side Panel（B） FRONT FACING Seat（A） This Chair has multiple parts and may require up to 30 minutes to assemble.To give you an overview of this Chair parts, the above picture is to help you putthe various parts into perspective.
Step 1 A ③ A Open the carton and place all the parts onto a clean, non-marring surface. Take out the silders in the four ends of the Seat(A ) using Allen Key( ③). Step 2 A A C C ① setp2.2 setp2.1 ③ ③ ② Place the Right Side Panel (C) facedown. Step2.1:Attach Seat(A) to Right Side Panel(C) using Bolts(②) with Allen Key(③) as shown above. Step2.2:Attach Seat(A) to Right Side Panel(C) using Bolts(①)with Allen Key(③) as shown above. Do not fully tighten the Bolts.
Step 4 B A A B D B A D D C C C setp4.2 setp4.3 setp4.1 ② ① ③ ③ ② ③ Step4.1:Attach Seat(A) and Backrest (D)to Left Side Panel(B) using Bolts(②) with Allen Key(③ ) as shown above. Step4.2:Attach Seat(A) and Backrest (D)to Left Side Panel(B) using Bolts(①) with Allen Key(③ ) as shown above. Step4.3:Attach Seat(A) and Backrest (D)to Left Side Panel(B) using Bolts(②) with Allen Key(③ ) as shown above. Do not fully tighten the Bolts. Step 5 F E Stand this Chair up.
Page 5 OF 5
