Assembly Instructions

Step 5
Place the Glass Top(D) on the assembled Table Frame.
Caution: The Table and its Parts are Heavy. Two adults are required for
lifting and moving them.
Step 6
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Stand the Ottoman up.
Put Cushion(C) on the Ottoman
Your Ottoman is ready for use.
Place the Ottoman on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully sit onto the Ottoman
This will help to align all parts at all joints.Then get off the Ottoman, and
in a sequential manner, proceed to tighten all Bolts. When tightening the
Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute this same
process.
Note: This step is done best with the assistance of a second adult.
Your Ottoman is ready for use.
This Ottoman can only be used on a flat, level surface.
Page 5 OF 6