Assembly Instructions

Step 3

Stand the Table up.

Firmly press down on the Table with both hands, this pressure will help align

all parts at all joints fully.

Then tighten all Bolts at all joints in a sequential manner.

DO NOT fully tighten a BOLT in one go and then move on to the next.

Rather, In a sequential manner, gradually tighten each Bolt until all

Bolts are evenly secured. This methodology will ensure maximum

evenness once all Bolts are fully tightened.

Attach Table Top Frame(C) to Right Leg(B) using Bolts(①) and Bolts(②)with

Allen Key(③) as shown in the picture.

Do not fully tighten the Bolts.

Step 4

②

③

①

③

Page 4 OF 6