Assembly Instructions Caution: You must read this before you proceed Table Parts List Label Picture Description QTY A Leg 2 B Table Top 1 Description QTY ① Bolt (M6*15MM) 5 ② Bolt (M6*25MM) 5 ③ Bolt (M6*20MM) 9 ④ Washer 9 ⑤ Allen Key(4MM) 1 ⑥ Allen Key(5MM) 1 Hardware Label Picture Page 1 OF 5
Assembly Preparation Before Beginning Assembly : *5 *5 *9 *9 Assembly Steps Overview Table Top (B) Leg (A) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 1.1 1.3 1.2 1.4 Open the carton and place all the parts onto a clean, non-marring surface. Place the Table Top(B) facedown. 1.1) Insert Leg (A) into Table Top(B). 1.2) Attach Leg(A) to Table Top(B) using Bolts(③) and Washers(④) with Allen Key(⑥) as shown above. 1.3) Attach Leg(A) to Table Top(B) using Bolts(②) with Allen Key(⑤) as pictured. 1.4) Attach Leg(A) to Table Top(B) using Bolts(①) with Allen Key(⑤) as shown above. Do not fully tighten the Bolts.
Step 2 2.1 2.3 2.2 2.4 2.1) Insert Leg(A) into Table Top(B). 2.2) Attach Leg(A) to Table Top(B) using Bolts(③) and Washers(④) with Allen Key(⑥) as shown above. 2.3) Attach Leg(A) to Table Top(B) using Bolts(②) with Allen Key(⑤)as pictured. 2.4) Attach Leg(A) to Table Top(B) using Bolts(①) with Allen Key(⑤)as shown above. Do not fully tighten the Bolts. Step 3 Stand the Table up, with assistance from your adult partner. Exert pressure floorwards, onto the Table with both your hands.
Page 5 OF 5
