Assembly Instructions

K111
nut
K110
bolt
K160
Allen wrench
K160
Allen wrench
K110
bolt
K111
nut
Top panel
Move panel to fix
Top back panel
Setting up the Bed Case – part C
Step 1: From Box two, place the top panel on edge with the face molding toward the floor as shown. Gently lift the side panels up and slide the molding underneath, using
guide dowels to position the panels together. Use a bolt and barrel nut at each corner as shown.
Step 2: Position the top-back panel and connect with bolts and barrel nuts as shown.
Step 1
Step 2
5