Assembly Instructions

Guide

dowel

K117A

Safety chain from

Box2, bubblepack 2

K113A

Bolts

FROM BUBBLE PACK1 - HOLD THESE

PARTS ASIDE FOR LATER USE

K157B:3/8” spacer blocks

K157A:1/4” spacer blocks

K161B:12mm wrench

K161A:1/2” wrench

K160

Allen wrench

K123

screws

Wall

Setting up the Bed Case – part A

Step 1: Open Box #1, and lay out the top and bottom panels of the left and right side panels as shown, noting the distances marked between the panels

and from the bottom edge of the side panels to the wall.

Step 2: Align the top and bottom side panels with the guide dowels, then connect by using small bolts through the metal plate into imbedded sleeves.

Step 3: Open Box 2 and find bubble pack 2. Install the safety chains on both size panels using small screws.

Step 1

Step 2

Step 3