Assembly Instructions

PREPARATION FOR ASSEMBLY:

Please locate and confirm that you have the following 4 boxes to complete your Queen Size Murphy Bed.

PLEASE NOTE: The boxes are numbered “BOX 1” through “BOX 4”, please open the boxes in order, beginning with BOX 1.

TOOLS YOU NEED TO SUPPLY:

• A power drill gun with a #2 Phillips-head drive with a short extension.

• An Electronic Stud Finder.

• A step ladder that can safely hold your feet 30” off the floor.

• A pencil.

• A Queen-size mattress that is maximum 10” thick, and weighs maximum 70 lbs.

OTHER NOTES:

Please be aware that hardware parts will appear in each box as the Assembly Project progresses.

Please sift carefully through packing materials to make sure hardware packs go out in the trash.

HAVE FUN! – and call us if you need assistance

Please ignore the example

part numbers on these boxes

as yours could be different.

HELPFUL HINT:

Throughout the

assembly of your

Murphy Bed, you will

find it helpful to refer

frequently to pages 19

and 20, where the

contents of each bubble

pack and hardware box

are illustrated for easy

reference.