Assembly Instructions

There are no “left” or “right” parts – as they are created to be universal. Lay the two bases and two arms on end and with their bolt holes facing each other.
Note that the arms extend past the bases on one side – this is so that the “extra” arm length will overlap the Bed Case so that your sofa always stays in position.
K160
wrench
Bolt
K160
wrench
Bolt
STEP 1: Lay the sofa bases and arms on the floor as shown.
Use the ### Allen Bolt through base side into the threaded
sleeve in the Arm
Two bolts at the top
And at the bottom
Per side.
STEP 2: Use 4 Male / Female
Allen bolt connectors to join the two
Sofa halves together
STEP 3: Move the Assembled sofa body in place,
position the deck lids, lay in the seat cushions, and set the
back cushions on top – You’re ready to go!
CONTINUED FROM PAGE 18 – Assembling the Murphy Bed Sofa
Orient the deck hand-holds
toward the front for
convenient use
Sofa arm overlaps
the Bed Case
Enjoy the comfortable “ride” of your pocket-coil seat cushions, and the convenient storage of pillows and bedding below!!
24