Assembly Instructions

STEP 1 AND STEP 2 STEP 3

STEP 1

Install 4 K105B bolt

+4 K106 washer

and tighten full

STEP2

Full tighten all 4

bayonet bots

K105B bolt

K106 washer

K161B

Connect 4 K152

connector bar

as shown

K105B bolt

K106 washer

K152 bar

Wood

face

STEP3

Install all 4 K152 bars as shown

K161B

wrench

Upper capture

Lower

capture

Make sure bar is fully

between all 4 upper &

lower captures

Connecting all the Supports to build a strong frame

Step 1: Use 4 K015B Bolts with 4 K106 Washers, and the K161B wrench to tightly connect the lateral-center frames of TT to TB.

Step 2: Now go back and fully tighten the 4 bolts that we left loosely connected through the bayonets on the previous page.

Step 3: One-at-a-time, position the 4 K152 support bars – making sure they are nestled between all 4 upper and lower captures - and install

with 4 bolts and 4 washers each.