Assembly Instructions

Setting up the Bed Tray – part A
BT
BOTTOM TRAY
TT
TOP TRAY
K152
Side support bar
K153
2 Bayonet connect bar
K152
Side support bar
K152
Side support bar
K152
Side support bar
Step 1: Open boxes 3 and 4 and lay out the contents as shown below with the wood face of the bed tray face-down on the carpet/blankets/etc., that will protect it.
Pay particular attention to the K153 Bayonet Connector & K152 Side Support Bars that you will find distributed in the two boxes.
10
Make sure the
Bearing Post is
positioned
toward the Bed
Case