Installation & Assembly

1: Carefully unpack the table lamp, remove protective cardboard and plastic.
2: Insert the bulb by screwing in to the lamp holder, inside the shade.
3: The metal shade can be adjusted to change the shade angle.
Your table lamp is now ready for use.
Maintenance and Care
 Never tamper with lamp holder or electrical parts
 Allow bulb to cool before replacement
 Unplug lamp before cleaning. Clean with a dry soft cloth
CAUTION: The metal shade may become hot, depending on the bulb type.
Do not use higher wattage bulbs than recommended
D
E26CFL BULB
11 WATT MAX
E26 BULB
40 WATT MAX
Assembly and Safety Instructions
The table lamp is constructed using powder coated metal- ware and natural timber.
We suggest that the finish is polished with a fine cotton cloth. This will remove any stains that
may
occur through regular usage.
The m entioned voltage of 120v should comply with the voltage of your electricity system. If
voltage is not 120v, do not connect the lamp.
120v
E26 MAX 40W