Caution: You must read this before you proceed Table Label Description QTY A Left Leg 1 B Right Leg 1 C Table Top Frame (with Suction Cups) 1 D Glass Top 1 Description QTY ① Bolt(M6*20MM) 5 ② Bolt(M6*25MM) 5 ③ Allen Key 1 Label Picture Picture
Before Beginning Assembly: Glass Top(D) Right Leg(B) Table Top Frame (C) Left Leg(A) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Take out the silders in the four ends of Table Top Frame(C ) using Allen Key(③). Step 2 Open the carton and place all the parts on a clean, non-marring surface. 2.1 Attach the Table Top Frame(C) to the Left Leg(A) using Bolt(②) and Allen Key(③) as shown in the picture. 2.2 Attach the Table Top Frame(C) to the Left Leg(A) using Bolt(①) and Allen Key(③) as shown in the picture. Do not fully tighten the Bolt. Caution: The Table and its Parts are Heavy.
Step 4 Stand up the table, check stability and then tighten the bolts. Note DO NOT fully tighten a BOLT in one go and then move on to the next. Rather, In a sequential manner, gradually tighten each Bolt until all bolts are evenly secured. This methodology will ensure maximum evenness once all Bolts are fully tightened. Step 5 Place the Glass Top(D) on the assembled Table Frame. Caution: The Table and its Parts are Heavy. Two adults are required for lifting and moving them.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
