DINING CHAIR
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call our Customer Service In order to assist you in a timely manner, please have the following information ready: Model # Part Number or Letter Purchased at Date of Purchase If you wish to return the product, please contact the retailer where the product was purchased.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION C B A CHAIR BACK QTY 1 SEAT QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call our customer service FRONT LEG QTY 2
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 3 2 ALLEN KEY SCREW M8 x 45 MM QTY 1 4 ALLEN KEY SCREW M8 x 60 MM QTY 4 6 5 WASHER Ø22mm QTY 9 ALLEN KEY SCREW M8 x 90MM QTY 4 ALLEN KEY 5MM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service.
ASSEMBLY STEP 1 Align Seat (B) into pre-drilled holes on Chair Back (A). Attach Seat Cushion (B) to Chair Back (A) using Allen Key Screw (1) and one Washer each of (4) and (6). Use Allen Key (5) to tighten. Do not over-tighten.
ASSEMBLY STEP 2 Secure Seat (B) to Chair Back (A) using Allen Key Screws (3) and four Washers each of (4) and (6). Use Allen Key (5) to tighten. Do not over-tighten.
ASSEMBLY STEP 3 Attach Front Legs (C) to Seat (B) using Allen Key Screws (2) and four Washers each of (4) and (6). Use Allen Key (5) to tighten. Do not over-tighten.
ASSEMBLY STEP 4 Place Chair on a flat level surface to ensure it is level. If it is uneven, adjust either the Seat (B) or Front Legs (C). Ensure the Chair is level and then fully tighten all bolts.
ASSEMBLY STEP 5 Use the zipper to close the fabric on the bottom of the Chair.
ASSEMBLY STEP 6 Turn Chair right side up.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line or by email. We reserve the right to repair or replace the defective product, at its discretion.
