Assembly

6 |
English
Note! Installation by a certified electrician is recommended.
• Find your main fuse or breaker box in your
home.
• Turn off and/or unscrew all fuses.
• Turn off all circuit breaker switches that
control power to the room in which you
are working.
• Turn any wall switches off. If any pull
chains or switches are on the fixture, turn
off.
Note! Do not damage any wire insulation
during installation. Ensure no rough or sharp
edges are in contact with any wires.
Mounting Instructions:
1. Confirm power is off.
2. Remove the screws(3) from lamp
body(C) and take the mounting
bracket(B) down from lamp body(C).
3. Thread screws(1) into the mounting
bracket(B).
4. Attach the mounting bracket(B) to an electrical box(A) with screws(1).
Make the wire connections:
1. Confirm power is off.
2. Connect the electrical box black wire to the black fixture wire with connector (2).
3. Connect the electrical box white wire to the white fixture wire with connector (2).
4. Connect the green/yellow grounding wire to the copper fixture wire with connector (2).
Attach the lamp:
1. Attach the lamp body(C) to the mounting bracket(B) with the screws(3).