Caution : You must read this before you proceed BARSTOOL Label Picture Description QTY A Left Leg 1 B Right Leg 1 C Seat 1 D Backrest `1 E Footrest 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*20MM) 7 ② Bolt (M6*20MM) 9 ③ Bolt (M6*35MM) 5 ④ Allen Key 1 Before Beginning Assembly: *9 *7 5 Backrest(D) Left Leg(A) Right Leg(B) Seat(C) Footrest(E) FRONT FACING This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Left Leg(A) facedown. Attach Seat(C) to Left Leg(A) using Bolts(①) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 Attach Right Leg(B) to Seat(C) using Bolts(①) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 3 Attach Backrest(D) between Right Leg(B) and Left Leg(A) using Bolts(③) with Allen Key(④) as shown above. Do not fully tighten the Bolts.
Step 4 Attach Footrest(E) between Right Leg(B) and Left Leg(A) using Bolts(②) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 5 Stand the Barstool up and check for stability. Then proceed to tighten all Bolts at all joints. Note: DO NOT fully tighten any Bolt in one go and then move on to the next. Rather, in a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured. This methodology will ensure maximum evenness once all Bolts are fully tightened.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
