Assembly Instructions

Components and Hardware List

Made in Viet Nam

Accent NightStand

To remove the drawer if it ever

becomes necessary:

A. Pull the drawer fully open so

the black latch is visible in the

inside channel of the guides.

B. Release the latches by

simultaneously pushing one

lever up and the other down.

C. At the same time, pulling the

drawer forward until the slides

release.

To reinstall the drawers, carefully

align the channels of the guide

and push drawer back into

Dresser. Open and close

drawer fully a couple times to

verify proper operation.

Page 1 of 2

Bedroom

Assembly Instructions

PAGE 1
Page 1 of 2 Bedroom Assembly Instructions Made in Viet Nam Components and Hardware List Accent NightStand To remove the drawer if it ever becomes necessary: A. Pull the drawer fully open so the black latch is visible in the inside channel of the guides. B. Release the latches by simultaneously pushing one lever up and the other down. C. At the same time, pulling the drawer forward until the slides release.
PAGE 2
Anti-Tip Hardware Installation Instructions Page 2 of 2 Notice: This manufacturer recommends that steps be taken for certain furniture items toprevent or minimize the risk of tip-over. This furniture is equipped with Tip-over RestraintHardware for use to minimize this risk, if used. Please follow below installation steps. This manufacturer recommends that parents and guardians periodically visit the U.S. ConsumerProduct Safety Commission (CPSC) website at http://www.cpsc.