Owner Manual

4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
1. The hanging length of the cord (D) for this
fixture is adjustable. Hold the fixture canopy
(A) up against the ceiling to determine the
desired length before the entire fixture is
assembled.
Cords (D) are held in place by a set screw
(E). Loosen the set screw (E) to release the
cord (D) for adjustment.
E
D
A
1b
Screwdriver
(Not Included)
1a
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
2. Insert long machine screws (DD) through
mounting bracket (B) so the long machine
screws (DD) protrude outward. Connect the
mounting bracket (B) to the outlet box with short
machine screws (BB).
2
Outlet Box
BB
DD
B