Caution : You must read this before you proceed Chaise Lounge CAUTION : This Lounge is NOT a TOY. Keep your child / children at bay during the assembly process.
Before Beginning Assembly: Overview Back Leg (C) Front Leg (A) Seat Panel (B) FRONT FACING This Chaise Lounge has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chaise Lounge parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Remove the plastic plugs ( prevent the alum tube was scratched) from the four ends of the Seat Panel(B) using Allen Key(②) as shown above. Place the Seat Panel(B) with its inside facing up.
Step 3 3.1) Attach the Back Leg(C) to the Seat Panel(B) using Bolts(①) with Allen Key(②) as shown above. 3.2) Attach the Back Leg(C) to the Seat Panel(B) using Bolts(①) with Allen Key(②) as shown above. Do not fully tighten Bolts.
Step 5 5.1) Attach Front Leg(C) to Seat Panel(B) using Bolts(①) with Allen Key(②) as shown above. 5.2) Attach Front Leg(C) to Seat Panel(B) using Bolts(①) with Allen Key(②) as shown above. Do not fully tighten Bolts. Step 6 Stand the Chaise Lounge up. Place the Chaise Lounge on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully, sit onto to the Chaise Lounge. This will help to align all the parts at all joints.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
