Caution : You must read this before you proceed Storage Trunk Picture Label Picture Description QTY A Front Panel 1 B Back Panel 1 C Side Panel 2 D Base Panel 1 E Lid - Top Panel (with airhinge) 1 F Inner Lining 1 Page 1 OF 6
Label Description QTY ① Allen Key 1 ② Wrench Washer (M6) Bolt (M6*35mm) Bolt (M6*20mm) Bolt (M6*20mm) 1 ③ ④ ⑤ ⑥ Picture 20 17 2 7 ⑦ PVC Gasket 2 ⑧ Nut (M6) 2 Before Beginning Assembly: Page 2 OF 6
Overview FRONT FACING This Storage Trunk has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Storage Trunk parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts onto a clean, non-marring surface.
Step 2 Attach Back Panel(B) to Side Panels(C) using Bolts(④) and Washers(③) with Allen Key(①) as shown in the picture above. Do not fully tighten the Bolts. Step 3 Attach Base Panel(D) to the four Side Panels using Bolts(④) and Washers(③) with Allen Key(①) as shown in the picture above. Do not fully tighten the Bolts. Step 4 Attach Lid-Top Panel(E) to the Back Panel(B) using Bolt(⑥) with Allen Key(①) as shown in the picture above. Do not fully tighten the Bolts.
Step 5 Attach Pressure Hinge on Lid-Top Panel(E) to the mounting position inside the Back Panel(B) using Bolt(⑤), PVC Gasket(⑦), Washer(③) and Nut(⑥) with Wrench(②) and Allen Key(①) as shown in the picture. Tighten all Bolts at all joints fully in a sequential manner. Step 6 Spread out the Inner Lining(F). Place it into the Trunk. Then smooth out the corresponding Velcro tapes until all tapes meet and seal securely. There is a hole in the Lining that should be aligned to the Pressure Hinge.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
