Owner Manual

1. Unpacking Instructions
3
WARNING
!
WARNING
!
1.1
Open carton containing fan. Remove top half of styrofoam
unit. Remove parts and check to see that you have
received the following parts:
NOTE: If you are uncertain of part description, refer to
exploded view illustration.
A
B
E
J
K
H
I
D
M
C
G
L
F
PACKAGE CONTENTS
3
5
4
9
1
2
6
11
8
7
10
HARDWARE CONTENTS
Part Description Quantity
1 Threaded Studs, #8-32 x 1-1/4” 2
2 Lockwashers, External Tooth #8 2
3 Knurled Knobs, #8-32 2
4 Clevis Pin 1
5 Hairpin Clip 1
6 Wire Connectors, 12 ga. 5
7 #8-32 x 3/8” Washer Head Screws 41
8 1/4-20 x 1/2” Oval Head Screws 17
9 #6-32 x 3/8” Truss Head Screws
w/Lockwashers (Spares) 2
10 Hex Wrench 1
11 Blade Balance Kit 1
1.2
Remove the Fan Motor Assembly from the protective
plastic bag. Turn the upper styrofoam pad over and
carefully place the Fan Motor Assembly into the recess in
the pad with the top of the motor facing up.
P
art Description Qty.
A Fan Motor Assembly 1
B Hanger Bracket 1
C Hanger Ball / 6” Downrod Assembly 1
D Ceiling Cover 1
E Coupler Cover 1
F Lower Housing 1
G LED Light Fixture Assembly 1
H Glass 1
I No-Light Cover 1
J Blade Flange Plates 8
K Blade Flanges 8
L Wall Control / Hardware 1
M Fan Blades 8
Do not install or use fan if any part is damaged or
missing.
This product is designed to use only those parts supplied
w
ith this product and/or any accessories designated
specifically for use with this product. Substitution of
parts or accessories not designatedfor use with this
product
could result in personal injury or property
damage.
NOTE: Place the parts from the loose parts bags in a
small container to keep them from being lost.