Owner Manual

7. Optional Installation of No-Light Cover

Turning off wall switch is not sufficient. To avoid possible

electrical shock, be sure electricity is turned off at the

main fuse box before wiring. All wiring must be in

accordance with National and Local codes and the ceiling

fan must be properly grounded as a precaution against

ossible electrical shock.

WARNING

7.1

Removal of LED Light Fixture Assembly, if previously

installed.

Skip to 7.4 if LED Light Fixture Assembly is NOT

installed.

Remove and retain the Glass from the opening of the

Lower Housing by turning the Glass counter-clockwise

(Figure 29).

NOTE: Store the Glass in a safe place for future use,

if needed.

LOWER

HOUSING

ROTATE GLASS COUNTER-CLOCKWISE TO

DISE

NGAGE

FROM THE LOWER HOUSING DIMPLES

GLASS

Figure 29

REMOVE THREE #6-32 x 3/8"

TRUSS HEAD SCREWS WITH

LOCKWASHERS

LED LIGHT FIXTURE

ASSEMBLY

LOWER

HOUSING

Figure 30

7.2

Remove and retain the three #6-32 x 3/8” Truss Head

Screws with Lockwashers from the Lower Housing to

detach the LED Light Fixture Assembly (Figure 30).

NOTE: Store the #6-32 x 3/8” Truss Head Screws with

Lockwashers in a safe place for future use, if needed.