Owner Manual

15
6. Final Assembly (Continued)
6.9
Engage the Fan Motor 2-Pin Wire Connector into the
2-pin Wire Connector of the LED Light Fixture Assembly
(Figure 26).
The connection is complete when you hear a soft click.
LED LIGHT FIXTURE
ASSEMBLY
2-PIN WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
FAN MOTOR
2-PIN WIRE CONNECTOR
Figure 26
To avoid possible fire or shock, do not pinch wires
between the lower housing and the LED light fixture
assembly.
WARNING
!
6.8
I
f using the No-Light Cover, skip this Section and go to
Section 7.
Remove one of the three #6-32 x 3/8” Truss Head Screw
with Lockwasher from the Lower Housing (Figure 25).
Retain the Screw for future installation.
Loosen the other two Screws several turns.
Carefully tuck all the Wires and Connectors into the Lower
Housing and place the LED Light Fixture Assembly onto
the Lower Housing.
REMOVE ONE #6-32 x 3/8"
TRUSS HEAD SCREW WITH
LOCKWASHER
LOWER
HOUSING
LOOSEN TWO #6-32 x 3/8"
TRUSS HEAD SCREWS
WITH LOCKWASHERS
Figure 25