Owner Manual

13
6. Final Assembly (Continued)
BLADE FLANGE PLATE
#8-32 x 3/8" WASHER HEAD
SCREWS (5)
CEILING FAN BLADE
BLADE FLANGE
CURVED PORTION
OF FAN BLADE
FACING
DOWNWARD
Figure 21
6.4
Position a Ceiling Fan Blade (with the curved portion of
the blade facing down) onto a Blade Flange (Figure 21).
Place a Blade Flange Plate onto the Ceiling Fan Blade,
aligning the four holes (Figure 21).
Securely fasten the Blade Flange, Ceiling Fan Blade and
the Blade Flange Plate using five #8-32 x 3/8” Washer
Head Screws (supplied) per Assembly (Figure 21).
Repeat for remaining seven Blade/Flange/Plate
Assemblies.
1/4-20 x 1/2" OVAL HEAD SCREW
(2 per blade/flange assembly)
MOTOR HUB
FLANGE/BLADE
ASSEMBLY
FLANGE INTERCONNECTING LIP
Figure 22
6.5
Attach the Flange/Blade Assembly to the Motor Hub
using two 1/4-20 x 1/2” Oval Head Screws (supplied)
(Figure 22).
Attach the Flange/Blade Assemblies clockwise making
sure that the Interconnecting Lip of the Flanges mate with
the next Flange Attachment (Figure 22).
Repeat this procedure for the other seven Flange/Blade
Assemblies.
Make sure all the screws are tightened securely.
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing the
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
WARNING
!
SHIPPING SPACER (8)
SHIPPING SPACER SCREW (8)
MOTOR
ASSEMBLY
Figure 20
6.3
Remove the Shipping Spacers and the Spacer
Attachment Screws from the Fan Motor before installation
o
f Blade Assemblies (Figure 20).
D
iscard the Spacers and Spacer Screws.