Assembly Instructions

Attach Connector(C) between Legs(B) using Bolts(②) and Washers(③) with Allen Key(①)
as pictured.
Do not fully tighten all the Bolts.
Step 1
Open the carton and place all the parts onto a clean, non-marring surface.
Attach Leg(B) to Table Top(A) using Bolts(②) and Washers(③) with Allen Key(①).
Note: Please only assemble the outside Bolts, as the pictured above.
Do not fully tighten all the Bolts.
Repeat the same process with the remaining three Legs(B).
Step 2
Page 3 OF 5