Assembly Instructions

ANTI TIPPING

A. CHEST 1 SET

PARTS IDENTIFICATION

HARDWARE IDENTIFICATION

1 Pc

2 Pcs

Mur

Wall

Step 3: Place the chest into position so both mounting brackets are vertically in line. Lace the end of the restraint strap through the

bigger hole on each bracket. Bring both ends together and slide the flat end through the locking end and draw it through until all slack

is removed. Please make sure that the strap is securely laced and locked.

This anti-tipping kit must be attached to a wall using the

provided 50mm screws.

Step 2: Attached the second bracket securely to the wall using the

provided longer 50mm screw, through the smaller hole of the

bracket. Please attach the second bracket to the wall 2 inches

lower than the first bracket that was attached to the back of the

chest.

Mur

Wall

Step 1: Attach the bracket securely to the back top rail of the

chest using the provided smaller 16mm screw, through the

smaller hole of the bracket.

16mm Screw

50mm Screw

Tie Strap

L Bracket