Installation & Assembly

Step 4
Step 5
Attach Lett Tube(B) and Right Tube(C) to Middle Tube(D) using Bolt(②) and Washer(④)
on one side, and using Washer(④) and Nut(⑤) on the other side; tighten with
Spanners(12) and Spanner (13).
Do not fully tighten the Bolts.
Insert Lower Pole(E) into Base(A), turn the Lower Pole(E) and align mounting positions.
Attention the Lower Pole(E)'s screw holes need to backward.
Attach Lower Pole(E) to Base(A) using Bolts(①) and Washers(④) on one side, and
using Washers(④) and Nuts(⑤) on the other side; tighten with Spanners(12) and
Spanner (13).
Do not fully tighten the Bolts.
Bolt (②)
Washer (④)
Left Tube (B)
Base (A)
Washer (④)
Nut (⑤)
Middle Tube (D)
①
④
Lower Pole (E)
⑤
④
Base (A)
Right Tube (C)
Noble House Home Furnishings LLC Page 6 OF 10