Assembly Instructions

Step 1
Step 2
Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
Place Seat(A) facedown on the ground, as shown in picture above.
Align the Hind Legs(B) with mounting positions on the base of the Seat(A).
Ensure the Leg mounting postions(B1) match the Seat mounting pointions(B1).
Attach Hind Legs(B) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the
picture.
Do not fully tighten the Bolts.
Align the Front Legs(C) with the mounting positions on the base of the Seat(A).
Ensure the Leg mounting postions(C1) match the Seat mounting pointions(C1).
Attach Front Legs(C) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the
picture.
Tighten all Bolts at all joints in a sequential manner.
Page 3 OF 5