Caution : You must read this before you proceed Chair Label Description QTY A Seat 1 B Hind Leg 2 C Front Leg 2 Description QTY ① Allen Key 1 ② Bolt (M6*16) 13 ③ Washer 13 Label Picture Picture Page 1 OF 5
Before Beginning Assembly: Overview Seat (A) Front Leg (C) Hind Leg (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place Seat(A) facedown on the ground, as shown in picture above. Step 2 Align the Hind Legs(B) with mounting positions on the base of the Seat(A). Ensure the Leg mounting postions(B1) match the Seat mounting pointions(B1). Attach Hind Legs(B) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the picture. Do not fully tighten the Bolts.
Step 4 Place the Chair on a LEVEL SURFACE to check for wobbles. If it wobbles, adjust the Legs Pre-installed Levellers until the Chair is level with the ground. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
