Assembly Instruction

1.0
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Arc Lamp
Arc Lamp Arc Lamp
1. Unscrew pre-assembled washer (E) &(C) ,and nut (B)
from tube (F). Insert tube (F) into washer (E), base (D)
and washer(C), then use spanner (A) to secure nut (B)
until tight.
2. Insert tube (G) into tube (F) and tighten it with screw
(H) .
3. Unscrew pre-assembled screw (K) from pole (L) .
Insert pole (L) together and tighten it with screw (K) by
wrench (J).
4. Unscrew pre-assembled plastic ring (N) and socket
ring (O) from socket (L). Place the shade (M), plastic
ring (N) and socket ring (O) onto socket (L), and
tighten the socket ring (O) to secure shade (M).
5. Screw handle(I) to pole (P) until tight.
6. If you need to adjust the height by handgrip (P) to
reach the required height.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger
than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension
cord unless the plug can be fully inserted. DO NOT
ALTER THE PLUG .
----------------------------------------------------
BULB TYPE :Use only with maximum of 1*150 watt
incandescent bulb (bulb not included).
PARTS DIAGRAM
(1) * Spanner (A) (1)*wrench (J)
Arc Lamp