Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Phillips Screwdriver Eagle assembling a specific product (with 1 being (Not Included) easy and 5 being difficult). For most products, two persons are recommended. Hammer .
90-DAY LIMITED REPLACEMENT PARTS WARRANTY This stein comes with a 90-day limited replacement pairs warranty to the original purchaser of new products against defects in materials and workmanship for a period of winery (90) days from the date of receipt. This warranty i§ not transferable.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES 1 1t is highly recommended that the Position ach part correctly and insert assembly should be done near the screws of bolts into their respective area of its intended location. Marks holes by hand tighten or using the sue you have enough space to move proper hand tool.
PER-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following : 1.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note:Every cam lock bolt must have a cam lock connector in order to ‘ fasten the parts together. Align the cam connector with its side opening (or arrow) end of the cam bolt pointing to the small by using a a drilled hole. screwdriver. b SNA Tun right (clockwise) to tighten. (1 ) Secure the threaded (2) (3) Two parts should fit snugly } Insert the cam lock against each other. bolt into the per-drilied hole l < above the cam @ connector.
HARDWARE LIST Bo o ol7x28x2 pests Cc (. o11x28x2 PCs HOW Cam Bolt 180° Cam Lock |b Sexes Cem Bolt inch 2 insert Cam Bolt into |3. luster Cam Lock. 4. Gently turn Cam ’ panel. bolt hole of joining | arrow facing Holt. Lock clockwise to panel. rock position. Due to the size and/or weight of this product,it is highly recommended that the assembly should be done near the area of its intended location.
ANS ERE 1) ripe (2) apes Before you begin,please read"Assembly and Care Introduction"and "Cam Lock Fastener Assembly Instructions".
