Assembly

2
1.1
Fit (A) seat onto bolts of (B) back,
aligning sides and bottoms of both
pieces.
1.2
Attach (A) seat to (B) back using (H1)
washers and (H2) nuts.
Tighten with wrench.
step 1
2.1
Remove plastic caps from (C) legs,
and attach to (A) seat using one (H1)
washer per leg.
Once legs are secure, turn the chair
upright to check if level.
If the item is not level, unscrew the
shortest leg and add an additional
(H1) washer.
Repeat as needed.
Please note: you may have extra (H1)
washers depending on how many
you use to level the chair.
step 2
Chair assembly