Assembly Instructions

Step 4
Align Right Armrest(B) to Backrest(D) and Seat(C).
3.1 Insert the Dowel on the Backrest(D) into the mounting position of the Right
Armrest(B).
3.2 Attach Right Armrest(B) to Backrest(D) and Seat(C) using Bolts(①) and
Washers(②) with Allen Key(③) as shown in the picture.
Stand the Chair up.
Exert pressure floorwards, onto the Chair with both your hands.
This pressure will help the Chair reach full alignments status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts and Screws in a sequential
manner, until evenly secured.
When tightening the Bolts and Screws sequentially.
DO NOT tighten any Bolt or Screw fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and Screws and excute the same
above process.
If the Chair is not stable it could lead to damage to the product.
Put the Seat Cushion(E) on the Chair.
Your Dining Chair is ready for use.
This Dining Chair can only be used on the flat, level surface.
Page 5 OF 6