Assembly Instructions

ManualsBrandsBrayden Studio ManualsOutdoor & Patio FurnitureArabella Rectangular 6 - Person 70.5'' Long Dining Set

Caution : You must read this before you proceed

BENCH

CAUTION : This Bench is NOT a TOY.

Keep your child / children at bay during the assembly process.

For moving

the Bench and to prevent damage to the Chair, two adults may be needed to

execute this action.

Summary of content (6 pages)

PAGE 1
Caution : You must read this before you proceed BENCH CAUTION : This Bench is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Bench and to prevent damage to the Chair, two adults may be needed to execute this action.
PAGE 2
Label Picture Description QTY A Bench seat with legs 1 B Leg Support Bar 2 Label Picture Description QTY ① Long Bolt (M6x45mm) 5 ② Short Bolt (M6x30mm) 5 ③ Allen Key 2 ④ Sleeve Nut (6x13mm) 5 Before Beginning Assembly: 2
PAGE 3
OVERVIEW Bench Seat With Legs (A) Leg Leg Support Bar (B) FRONT This Bench has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise youself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 ③ Step 2.2 Step 2.1 ③ A ① ③ ① Place the Bench (A) facedown, onto a clean, soft surface to avoid any scratches or damage to the product. 2.1) Lift legs upwards and outwards until the braces are flush with the base of the Bench, as shown in the above picture. 2.2) Insert 2 Long Bolts(①) and Sleeve Nut (m) through the mounting position of the Leg using the Allen Key(③) Only loosely tighten the Bolts. Repeat the same process with the other Leg. Step 3 Step 3.1 B A ② ③ ③ Step 3.
PAGE 5
Step 4 Stand the Bench right side up. Gently, sit into to the Bench. This would help to align all parts at all joints and to protect wobble issue. Then get off the Bench, in a sequential manner, tighten all Bolts until fully locked into position. Your Bench is ready for use. This Bench can only be used on a flat, level surface.
PAGE 6