Assembly Instructions

Step 6
Position Side Support Bar(D) as shown in picture above.
6.1)
Insert four Long Bolts(
) through the vertical mounting positions of the
Side Support Bar(D) and affix using Allen Key(
)
6.2)
Insert two Medium Bolts(
) through the horizontal mounting positions of
the Support Bar(D) and affix using Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Side Support Bar(D).
Now, in a sequential manner, tighten all Bolts at all joints.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 7
Stand the Table right side up.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Position Side Support Bar(D) as shown in picture above.
6.1)
Insert four Long Bolts(
) through the vertical mounting positions of the
Side Support Bar(D) and affix using Allen Key(
)
6.2)
Insert two Medium Bolts(
) through the horizontal mounting positions of
the Support Bar(D) and affix using Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Side Support Bar(D).
Now, in a sequential manner, tighten all Bolts at all joints.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
A
A
B
FRONT FACING
Step 3.1
Step 3.2
C
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .