Assembly Instructions

ManualsBrandsBrayden Studio ManualsOutdoor & Patio FurnitureArabella Rectangular 6 - Person 70.5'' Long Dining Set

1

2

3

4

5

6

Caution : You must read this before you proceed

TABLE

③

④

④

③

①

④

Table

Leg Support Bar

Step 2.1

Step 2.2

①

④

Step 4.1

Step 4.2

①

④

④

②

Step 6.1

Step 6.2

A

A

B

D

FRONT FACING

Step 3.1

Step 3.2

C

Do not put hot items directly on furniture surface

Do not clean furniture with harsh cleansers or polish.

To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct

sunlight is recommended.

Children should not climb or jump on the furniture.

Do not write on furniture without a padded barrier to protect the surface.

To obtain the longest lifespan of your outdoor products, avoid extended and

lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover

the product and /or place under patio or awnings.

Not for commercial use. For residential use only .

Stains may be removed with mild soap solution and damp cloth.

Keep away from sources of ignition.

Dust and pick-up spills using a clean, non-colored, lint-free cloth .

CAUTION

: This Table is NOT a TOY.

Keep your child / children at bay during the assembly process.

For moving the Table and to prevent damage to the Table, two adults are

needed to execute this action.

③

④

④

③

①

④

Table

Leg Support Bar

Step 2.1

Step 2.2

①

④

Step 4.1

Step 4.2

①

④

④

②

Step 6.1

Step 6.2

A

A

B

D

FRONT FACING

Step 3.1

Step 3.2

C

Do not put hot items directly on furniture surface

Do not clean furniture with harsh cleansers or polish.

To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct

sunlight is recommended.

Children should not climb or jump on the furniture.

Do not write on furniture without a padded barrier to protect the surface.

To obtain the longest lifespan of your outdoor products, avoid extended and

lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover

the product and /or place under patio or awnings.

Not for commercial use. For residential use only .

Stains may be removed with mild soap solution and damp cloth.

Keep away from sources of ignition.

Dust and pick-up spills using a clean, non-colored, lint-free cloth .

Summary of content (7 pages)

PAGE 1
Caution : You must read this before you proceed TABLE CAUTION : This Table is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Table and to prevent damage to the Table, two adults are needed to execute this action.
PAGE 2
Label Picture Description QTY A Table 1 B Leg Support Bar 2 C Middle Support Bar 1 D Side Support Bar 2 Label Picture ① ② ③ ④ Before Beginning Assembly: Description QTY Long Bolt (M6x50mm) 19 Medium Bolt (M6x40mm) Short Bolt (M6x30mm) 5 Allen Key 2 5
PAGE 3
OVERVIEW Table Leg Support Bar FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 Step 2.1 Step 2.2 A 2.1) With the assistance of an adult helper, unfold the Table(A) as shown. Note: When unfolding the Table(A), you must hold the Legs against the Table(A) 2.2) Then lay the Table(A) facedown onto a clean, flat surface to avoid any scratches or damage to the product. Step 3 Step 3.2 Step 3.1 ① ④ 3.1) Lift legs upwards and outwards until they are flush with the base of the Table, as shown in the above picture. 3.
PAGE 5
Step 4 Step 4.1 B ③ ④ Step 4.2 A ④ ③ Position Leg Support Bar(B) as shown in picture above. 4.1) Secure Leg Support Bar(B) to Legs using Short Bolt(③) with Allen Key(④). 4.2) Secure Leg Support Bar(B) and Table(A) using Short Bolt( ③) with Allen Key(④). Only loosely tighten the Bolts. Repeat the same process with the other Leg Support Bar(B). Step 5 C ④ ① Position Middle Support Bar(C) as shown in picture above.
PAGE 6
Step 6 ④ ① Step 6.1 D Step 6.2 ② ④ Position Side Support Bar(D) as shown in picture above. 6.1) Insert four Long Bolts(①) through the vertical mounting positions of the Side Support Bar(D) and affix using Allen Key(④) 6.2) Insert two Medium Bolts(②) through the horizontal mounting positions of the Support Bar(D) and affix using Allen Key(④) Only loosely tighten the Bolts. Repeat the same process with the other Side Support Bar(D). Now, in a sequential manner, tighten all Bolts at all joints.
PAGE 7