Installation Instructions

2
4
2
CERTIFICATION: cETL Damp
3
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied thumb screws.
SECURE GLASS SHADE
Place the glass shade up to the socket and secure
by glass retaining nut into the designated hole
on socket.
CONNECT THE WIRES
Gently pull the supply wires. Connect the black supply
wire to the black fixture wire. Secure with the supplied
wire nuts. Connect the white supply wires to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wires
with U.L. Certified electrical tape (not supplied).
Tuck all wires carefully into the J-Box.