Assembly and Installation Instructions

7.Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw, and then connect it to the
house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
8. Attach the canopy to the mounting strap by inserting the top loop, and then secure it with the collar.
A
B
A: 8-3/4”
B: 17-3/4”
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Nipple(E)
Washer (G)
Loop Lock (K)
Chain (L)
Turn on the power at fuse or circuit box.
Spare Parts List:
Mounting Hardware
(1 SET)