Assembly and Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Nipple(E)
Canopy(H)
Top Loop(I)
Hex Nut(F)
Washer(G)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Loop
LED
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Nipple(E)
Washer (G)
Loop Lock (K)
Chain (L)
3. Connect the chain:
- Determine length of chain needed to achieve
desired fixture height. (To remove excess chain
section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire
through the chain, collar and canopy.
4. Connect one end of the chain to the loop using
a loop lock.
1. Attach the nipple to the mounting strap, and then secure it
with a washer and a hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
5. Connect the other end of the chain to top loop
by using the other loop lock.
6.Thread the fixture wire and fixture grounding wire through the top
loop, nipple and mounting strap.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Installation steps
Turn off the power at fuse or circuit box.
Warning: LED electronics can be damaged by
electro static discharge (ESD)shock.
Before installation, discharge yourself by
touching a grounded bare metal surface
to remove this hazard. To avoid damage,
do not touch the LED module.