Installation Instructions

2
1A
Secure the mounting plate to the electrical box with the two provided mounting plate screws.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white (square rigid) fixture wire to the neutral power line wire with a wire nut.
Connect the black (round smooth) fixture wire to the hot power line wire with a wire nut.
Secure the canopy to the mounting plate tightening the screw collar.
Place a shade onto a socket, then a spacer, and secure them by installing the collar nut and tightening it with the
special tool. Repeat for all shades.
Screw a lamp into each socket.
Using the help of another person, connect the lower portion of the chandelier to the top by hooking each fixture arm
into the corresponding eyelets.
1
2
3
4
5
6
7
ELECTRICAL BOX
Install the Fixture
Use 120 voltMAX 60 Watt
Type A19 Medium Base Lamp.
MOUNTING PLATE
SHADE
MOUNTING PLATE SCREW
1
7
8
5
6
SPACER
COLLAR NUT
SPECIAL TOOL
SOCKET
EYELET
EYELET
FIXTURE ARM
NIPPLE
SCREW COLLAR
CANOPY
8
2
4
3
LAMP
8