Assembly Instruction

Fixture Chain (GG) and over the
Canopy Chain Loop (EE). Tighten
the Canopy Lock Ring (FF) onto
the Canopy Chain Loop (EE) until
tight.
Suggested chain length for
Ceiling height :
8’ ceiling : use 15 links of chain
and 2 quick links
9’ ceiling : use 25 links of chain
and 2 quick links
10’ ceiling : use 35 links of chain
and 2 quick links
DD
GG
II
EE
FF
HH
HH
Supply
Wires and
Ground Wire
Figure 4
A
Figure 5
STEP 5 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into outlet box.
Note: If the electrical wire is going to be cut shorter than provided
you will need to identify the "L" line wire and the "N" neutral wire
before you cut the excess wire off. One is labeled N and the other
labeled L. To do this separate the "L" line wire and the "N" neutral
wire as far as you need to. Re-label the wire near where you want to
make the cut. Be sure to mark the wire on the side of the fixture and
not on the excess wire being cut and removed.
White wire
from supply
Ribbed side of wire from fixture
identified with the Label “N”
Black wire from
supply (or Red)
Smooth side of wire from fixture
identified with the label “L”
Ground wire
from supply
Ground wire
from fixture
FINISH: EARTH BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
STEP 6 - Install Bulbs
A. Insert bulbs into sockets and
screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 6
Bulb (not
supplied)
Socket
10.5”
7.25”
7.25”
10.5”
13.5”
18.75”
120” OVERALL
HEIGHT INCLUDES
96” CHAINS AND
(2) QUICK LINKS
4.5”Sq.
1”
How to Replace Glass Shade
A. Unlock Lock Balls and
from
the Cage
.
C. Replace the
verse
above steps to reinstall
prev
remove Fixture Hood
.
B Unscrew Flat Head Screws
on the Cage with Glass
Shade, remove Tabs and
Glass Shade from the Cage.
Glass Shade
with a new one and re
iously removed parts
back onto fixture.
Flat Head
Screw
Lock Ball
Glass
Shade
Cage
Tab
Figure 7
Fixture
Hood
Bolt
2of2