Installation & Assembly

STEP 1: Unpack all the parts and classify them according
to the illustration shown at the side. Place the parts on a
scratch free surface.
STEP 2: Fix the glass using the snuffer and socket ring.
STEP 3: Attach the bobeche with ball nuts.
STEP 4: Install the correct bulb (provided).
STEP 5: Make sure the power is turned off at the wall outlet
box where the xture is to be installed. Secure the mounting
bar to the wall junction box using the mounting screws.
STEP 6: Use the wire connection to connect the positive
and neutral wires. Connect the ground wire to the junction
box ground port.
STEP 7: Secure the xture to the wall outlet box using
two ball nuts.
Turn on the power at fuse or circuit box.
ASSEMBLY AND MOUNTING INSTRUCTIONS
CAUTION:
To reduce the risk of re, use the specied lamp wattage (or smaller) and bulb type identied on the product.
CLEANING INSTRUCTIONS:
Do not use polish or cleaners on your product. Just wipe clean with a soft cloth.
CAUTION – RISK OF FIRE
This product requires installation by a qualied electrician. Before installing be sure to read all instructions
and TURN THE POWER TO THE ELECTRICAL JUNCTION BOX OFF.
PLEASE READ THE ASSEMBLY INSTRUCTION SHEET CAREFULLY BEFORE PROCEEDING. Carefully unpack
and identify all parts prior to building the unit. Each part is identied on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection, you must return the item for any
reason. Please repack the unit using the original carton and inserts.