Installation & Assembly

ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A FLAT
SURFACE AND LINE THEM UP AS PER THE SKETCH.
2. ADJUST THE HEAD TO THE ANGLE DESIRED, THEN TIGHTEN
WITH NUT (B).
3. I
INSTALL SHADE (C) ONTO SOCKET SECTION OF LAMP BODY
(A), THEN SECURE WITH SOCKET RING (D).
4. SCREW BULB (E) INTO SOCKET. (BULB NOT INCLUDED)
5. INSERT THE POLARIZED PLUG INTO WALL OUTLET, TURN ON
THE SWITCH AND ENJOY YOUR NEW LAMP.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE A 13W CFL TYPE BULB OR 60W (MAXIMUM) INCANDESCENT A TYPE BULB.