Installation Instructions

2
1A
Secure the mounting plate to the junction box and install the anchor screws.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly place the wires into the junction box and/or fixture, then mount the back plate onto the mounting plate studs
and secure it with four cap nuts.
Slide the diffuser into the diffuser channel, then install the end caps and secure them with two end cap screws.
Slide the shade into the shade channel.
Install the brackets to the end caps and secure them with two thumb screws.
1
2
3
4
5
Install the Fixture
6
JUNCTION BOX
NEUTRAL WIRE
HOT
WIRE
WHITE WIRE
BLACK
WIRE
MOUNTING
PLATE STUD
BACK PLATE
CAP NUT
MOUNTING PLATE
DIFFUSER
THUMB SCREW
4
1
3
8
END CAP
DIFFUSER
CHANNEL
ANCHOR SCREW
6
END CAP SCREW
BRACKET
SHADE
SHADE
CHANNEL
5
5
7
8
7
1