ANTI TIPPING KIT PART IDENTIFICATION HARDWARE IDENTIFICATION 1. G SHORT SCREW 1PC. A. CHEST 1 SET 2. Qe LONG SCREW 1PC. / 3, ———CABLE TIE 1PC. % 4, L BRACKET PCS. This tip restraint must be attached to a wall STEP 2 stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the chest using short screw provided, through the smaller hole. Locate the other bracket on the wall over a wall stud and twa inches below the mounting bracket secured to the back of chest.
