Caution : You must read this before you proceed Barstool Label Picture Description QTY A Left Armrest with Leg 1 B Right Armrest with Leg 1 Page 1 OF 8
C Backrest 1 D Seat 1 E Seat Cushion 1 F Footrest 2 Description QTY ① Bolt (M6*30mm) 7 ② Bolt (M6*15mm) 9 ③ Washer 16 ④ Allen Key 1 Label Picture Before Beginning Assembly: Page 2 OF 8
Overview Backrest(C) Left Armrest with Leg(A) Seat(D) Seat Cushion(E) Right Armrest with Leg(B) Footrest(F) Front Facing This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts on a clean, non-marring surface.
Step 2 Place the Backrest(C) face up. Attach the Seat(D) to the Backrest(C) using Bolts(①) and Washers(③) with Alley Key(④). Do not fully tighten the Bolts. Step 3 Dowel Place the Left Armrest with Leg(A) face down on the soft and clean surface. Insert the Dowel on the Backrest(C) into the mounting position of the Left Armrest with Leg(A). Attach the Backrest(C) and Seat(D) to the Left Armrest with Leg(A) using Bolts(①) and Washers(③) with Alley Key(④). Do not fully tighten the Bolts.
Step 4 Dowel Place the Right Armrest with Leg(B) face down on the soft and clean surface. Insert the Dowel on the Backrest(C) into the mounting position of the Right Armrest with Leg(B). Attach the Backrest(C) and Seat(D) to the Right Armrest with Leg(B) using Bolts(①) and Washers(③) with Alley Key(④). Do not fully tighten the Bolts.
Place the Footrests(F) beween the Legs as shown. Attach the bottom side of Footrest(F) to the Legs using Bolts(②) and Washers(③) with Alley Key(④). Then turn the Barstool over and attach another side of the Footrest(F) using Bolts(②) and Washers(③) with Alley Key(④). Do not fully tighten bolts. Step 4 Place the Barstool on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Barstool some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
Step 5 Place the Seat Cushion(E) on the Barstool. Your Barstool is ready for use. This Barstool can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
