Assembly Instructions

Page 16 of 20
Center point
between Wall
Stabilizers
Height to BOTTOM
of Wall Stabilzers
7b
16”
With a pencil, mark the following on the
wall:
a) Height of the BOTTOM of the Wall
Stabilizers
b) Width of both Wall Stabilizers mounted
c) The center point between the Wall
Stabilizers
d) location of wood studs
The finished assembly will extend 4
inches past the Wall Stabilzers on each
side
7a
Line up and position one of the Wall Stabilizers
to the left of the center line with the Bottom edge
along the horizontal line.
Locate wood studs and pre-drill through the Wall
Stabilizer and into the wood stud.
Use a 1/8th inch drill bit and pre-drill holes 3½
inches deep.
center
stud
finder