Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
2.)
Cleaning & Care:
Page 2 of (2)
1.)
3.)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
C
A
B
C
B
A
(A)
Cross bar
(B)
Wire nuts (x3)
(C)
Decorative nuts (x1)
Step.1: Install Cross bar (A) to outlet box.
Step.3: Adjust wire length to desired mounting
height, and tighten strain relief to secure.
Install fixture to bracket and tighten ball
nuts on the canopy to secure.
Step.2: Wire fixture to wires in outlet box.
Silver wire is for Ground.