Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
2.)
Cleaning & Care:
Page 2 of (2)
1.)
3.)
4.)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
C
A
B
D
A
B
C
D
(A)
Backplate
(B)
Mounting bracket
(C)
Wire Nuts (x3)
(D)
Mounting screws (x2)
Step.4: Caulk around fixture with outdoor
silicone sealant to prevent water intrusion.
Leave a small gap at the bottom to allow
moisture to escape. Install fixture to back
plate (B) and tighten mounting screws (D)
to secure.
Step.1: Install Mounting bracket(A) to outlet box.
Step.2: Wire fixture to wires in outlet box.
Green/Copper wire is for Ground.
Step.3: Install Backplate(B) to Mounting
bracket(A).