Installation & Assembly

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (2)

To prevent water intrusion, caulk around back-plate

where fixture meets the wall using outdoor silicone

sealant. Leave a small gap at the bottom to allow

moisture to exit.

PAGE 1
Please consult your electrician for hanging fixture and wiring. To prevent water intrusion, caulk around back-plate where fixture meets the wall using outdoor silicone sealant. Leave a small gap at the bottom to allow moisture to exit. PRODUCTS ARE NOT INENDED FOR COMMERCIAL USE.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting bracket (B) Backplate (C) Wire Nuts (x3) (D) Mounting screws (x2) Locate all hardware & components before discarding packaging A 1.) Step.1: Install Mounting bracket(A) to outlet box. B 2.) Step.2: Wire fixture to wires in outlet box. Green/Copper wire is for Ground. A D 3.) B C C Step.3: Install Backplate(B) to Mounting bracket(A). D 4.) Step.