Installation & Assembly

4239-22/ 26 2.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
ASSEMBLY INSTRUCTION FOR
Trinity 5-Arm Arc Lamp
Model# 4239-22 / 26
21 Penn Plaza Suite 909 New York,NY 10001
Recommended to assemble with a helper.
1. Fold the excess cord and insert into pole (A), then place
part (G) into pole (A) and tighten it with screw(H).
2. Screw pole (A) onto pole (B).
3. Take out the black bushing from the hole of base (D) and
throw it out.
4. Place base(C) flat on ground. Stand up the rest of the lamp
and place threaded tube of pole (B) through hole on base (C)
while gently pulling any excess cord through base.
5. While keeping pole (B) inserted into base, slowly tilt the
lamp on its side to get access to bottom of base in order to
tighten it with washer (D) and nut (E) securely using wrench
(F)
Note: The Arc lamp should face forward in the same
direction as the switch, with the cord coming out of the
back of the base.
6. Place shade(I) onto socket and tighten it with socket
ring(J).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the
risk of electric shock (one blade is larger than the other). This plug
will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension cord unless the
plug can be fully inserted. DO NOT ALTER THE PLUG .
----------------------------------------------------
BULB TYPE :Use only with maximum of 5*60 watt incandescent
bulbs or 5*13W CFL bulbs. (bulbs not included) Must use all
incandescent or all CFL bulbs.
PARTS DIAGRAM
(1) * washer (D) (1)*Nut(E)
(1) * wrench (F) (1) *screw(H)
(5) * shade(I) (5) *socket ring(J)
NOTE : THIS LAMP SHIPS IN 2
SEPARATE BOXS

Summary of content (2 pages)